Solar Panel & Battery Storage Installers in Pulborough
Omni3 Limited is an MCS certified Solar PV and Battery Storage contractor based in Pulborough at 2 Masons Way, Codmore Hill. This is our home area — every installation is designed, installed and fully documented by our own engineers, not subcontractors. We are NICEIC Approved and carry RECC consumer protection on every domestic installation.
Solar energy in Pulborough and the surrounding area
Pulborough sits in the Arun valley in rural West Sussex, surrounded by open farmland and with the South Downs National Park immediately to the south. The village centre includes a conservation area with older stone and flint properties, while Codmore Hill, Nutbourne and the surrounding roads feature a mix of post-war and modern detached homes — many with generous, south-facing roof space that is well-suited to solar.
We also regularly install solar and battery systems for properties in Coldwaltham, Hardham, Wiggonholt, West Chiltington and the wider RH20 postcode. Because we are based here — not travelling from a regional depot — our engineers know the local property types, the typical roof pitches and the planning sensitivities that apply in this part of West Sussex.
A well-designed system for a typical Pulborough detached home can generate 3,500–5,500 kWh per year. Combined with battery storage and a time-of-use tariff, that translates to a 60–80% reduction in grid electricity consumption for most households. We design each system around your actual usage data — not a one-size template — and we explain the numbers clearly before asking you to commit.
Solar suitability in the Pulborough area
Modern detached homes
Properties on Codmore Hill, Nutbourne and the newer residential roads around Pulborough typically have 35–55 m² of usable roof space — enough for a 4–7 kWp system. South and south-west-facing pitches at 30–40° are common and ideal for solar. Many were built in the 1970s–2000s with conventional rafter construction that is straightforward to mount to.
Older stone and flint properties
Pulborough's village centre and nearby hamlets include listed and non-listed older buildings with stone or flint construction. These can accommodate solar in most cases, though structural and planning assessments are essential. Listed buildings require listed building consent. Conservation area properties must ensure visibility from the public highway is addressed. We advise on all of this during the survey — before you are asked to commit.
Rural and South Downs properties
Properties in Coldwaltham, Hardham, Wiggonholt and other villages that fall within or adjacent to the South Downs National Park boundary face tighter permitted development rules. In many cases a planning application is required rather than permitted development. We carry out a planning check at survey stage and manage the process where needed, including liaison with the National Park Authority.
South Downs National Park — planning advice included in every survey
Much of the land surrounding Pulborough falls within the South Downs National Park. Properties within the National Park boundary, and those in the village conservation area, are subject to planning rules that differ from standard permitted development. We check your property's planning status at the survey stage, advise you of any application requirements, and can prepare and submit planning applications on your behalf where needed. There is no additional charge for planning advice during the survey.
Recent solar installation in Pulborough
We have completed solar and battery storage installations across the Pulborough area for both residential and commercial clients. Our case study documents the design rationale, system specification, installation process and real-world results for a recent local project — including energy output figures, estimated annual savings and the documentation provided at handover.
Solar services we provide in Pulborough
- Free site survey with roof assessment, shading analysis and energy usage review
- Planning status check for South Downs National Park and conservation area properties
- Custom system design matched to your usage patterns, roof layout and tariff
- High-efficiency monocrystalline panels with 25+ year manufacturer performance warranty
- EcoFlow, Sigenergy and SolaX battery storage integration
- Smart tariff optimisation for Octopus Agile, Flux, Go and similar time-of-use tariffs
- MCS-registered installation with full certificate and handover documentation pack
- Smart Export Guarantee support — system registered on the MCS Installation Database
- EV charger integration — charge your vehicle from stored solar energy overnight
- Full commissioning, monitoring setup and system walkthrough at handover
- Ongoing support from the same local engineers who installed your system
Solar panel FAQ — Pulborough
Get a quote for solar panels in Pulborough
Book a free site survey. We are based locally in Codmore Hill — we will assess your roof, review your energy usage, check any planning requirements and design a system that fits your property and budget. No pressure, no obligation.